cie

e-ILV

The e-ILV provides free access to all the terms and definitions contained in the international standard CIE S 017:2020 ILV: International Lighting Vocabulary, 2nd edition.

To search for another term please use  "Back to the list" to return to the main page or the e-ILV.

For the complete set of terms and definitions CIE S 017:2020 can be purchased from the CIE Webshop. Members of a CIE National Committee or Associate National Committee have access to a 66,7 % discount on the purchase price of the standard.

For advice on CIE Publications contact helpdesk@cie.co.at. Note the CIE Helpdesk cannot assist with technical enquiries.

17-25-073

normalized detectivity, <of a detector>

D*

detectivity, D, normalized to take into account two important parameters of the detection system, the sensitive area, A, of the detector and the measurement bandwidth, Δf


where Φm is noise equivalent power

Note 1 to entry: The concept "normalized detectivity" is realistic only if the responsivity and noise output of the detector are frequency independent throughout the frequency range under consideration and if the noise equivalent input varies as the square root of the detector area; this is not always the case.

Note 2 to entry: The normalized detectivity is expressed in metre hertz to the power one half per watt (m⋅Hz1/2⋅W−1).

Note 3 to entry: This entry was numbered 845-05-66 in IEC 60050-845:1987.

Note 4 to entry: This entry was numbered 17-827 in CIE S 017:2011.

Publication date: 2020-12
Copyright © CIE 2020. All Rights Reserverd.